A mixing adhesive nozzle are designed to thoroughly mix the two components of a two-part epoxy adhesive as they pass through the nozzle. These nozzles have multiple mixing elements that ensure uniform mixing of the epoxy components. The result is a uniform mixture that is ready for immediate use.
Features
Design: The nozzle usually features a spiral or static mixer inside, which ensures the thorough mixing of the two components as they pass through the nozzle.
Material: Typically made from plastic, but can vary depending on the adhesive type and application.
Connection: It attaches to dual-cartridge dispensing systems that hold the separate adhesive components.
Size & Shape: Available in various sizes and shapes depending on the adhesive viscosity, required flow rate, and application area.
Application : Suitable for use in aerospace, appliance, automotive, construction, consumer goods, electrical, electronics, general industrial, metalworking, signage, specialty vehicle, transportation, woodworking applications.
Specification
Material : Polyethylene (PE), Polypropylene (PP)
Color :
* Coding Varies, often used to indicate type or mixing ratio:
Black: For dark or UV-cured epoxy; ensures full blending.
Green: For fast-curing epoxy; quick mix, good for low-viscosity.
Clear: For clear epoxy; easy to inspect and spot issues.
Yellow: For epoxy with fillers; excellent at blending thick materials.
Red: For high-temp epoxy (up to 200°C); handles heat, ideal for tough conditions.
Mixing Element Design : Static Mixer , Helical/Spiral Mixer
Number of Elements :
Length: 5 cm to 20 cm (2 inches to 8 inches)
Inner Diameter (ID) : 2 mm to 15 mm
Outer Diameter (OD) : 4 mm to 18 mm
Mixing Ratio : 1:1, 2:1, 4:1, 10:1
Flow Rate : 2 ml/min to 50 ml/min
Connection Type : Bayonet Fitting , Luer Lock
Pressure Rating : 50 psi to 300 psi
Inquiry - Mixing Adhesive Nozzle